Posting ID : A1068521822
Date Posted : 2015-08-19
Category : Photo Video By Owner
ChaseCam PDR100. Specs from their website below. This includes a 2GB Compact Flash card, all cords, cables and two mounts for use. Footage is great and this has many applications for use.
The PDR100 is a rugged solid state video and data recorder. It records a single stream of standard definition video, and can also record various data in sync with the video. Video is recorded as MPEG2 onto Compact Flash cards.
Rugged. Tested to 97G impact by NASA
Anodized aluminum case. Rubber bumpers for internal board shock isolation.
Media door for Compact Flash
User keypad and LCD menu text display
Wide power band. Provides regulated and filtered 12V power to external camera
Locking power connector (as well as DC Jack)
Internal SuperCap (battery) back up to preserve files on power drop or loss
Automatic boot up on power (user set)
Records to Compact Flash Cards (up to 32gig)
Time and Date Stamp (user set, can be turned off)
Gforce Overlays (user set, can be turned off). Friction bar graphs and/or text.
RS-232 input. Command control / status output via RS-232
RS-232 data stream input
Can continuous record (recycle recording)
User set file sizes to 4gig
Hands free recording or single button
LAN-C remote or custom remote
Internal microphone, user set sensitivity
Accepts external microphone (user adjustable sensitivity)
Accepts external audio (user adjustable sensitivity)
Can do audio mixing. . . left channel external audio, right channel microphone (internal or external)
Each audio channel independently adjustable
User set video size. User set compression levels. Smaller size and lower compression can extend recording times past 100 hours.
AV Output jack for external monitor or playback
Able to set custom file names (first two digits) to differentiate recorders
Power: 9-28VDC Input, 750ma max with camera
PAL or NTSC video 720480 Interlaced (480i) NTSC @ 30fps. PAL @ 25fps. Max 6mbs rate.
Users 300X or faster CF cards
Weight: 14 ounces
Size: 4? deep. 1.82? high. 5? wide.
Power via 2.15.5 DC Jack or 2 position Phoenix screw attached terminal block
Camera interface uses ChaseCam MiniDIN (4 pin) standard
AVOUT is 3.5mm 4 contact jack
MIC and AUDIO IN are 3.5mm Stereo jacks
LAN-C is 2.5mm jack
RS-232 and remote interface via 8 pni RJ-45 connector
CF Card connector standard
Power supply auto-power switch located inside of front door (red switch)
LED Indicator (On, Paused, Recording, Trigger Ready, MENU, error)
LCD status: CF Card capacity. Sound levels. Trigger on/off. Date/Time. Firmware version. Video Ready. CF Ready. Error messages. Video data.